The accredited laboratories of the Technical and Test Institute for Construction Prague, SOE (TZÚS Prague), offer tests in the field of thermal insulation products, a list of accredited test procedures can be found in the table below, in this area TZÚS Prague also offers non-accredited test procedures. If you are interested in services in this area, please contact the branch according to your chosen region, or use the inquiry form at the bottom of the page. Laboratory services are complemented by the offer of the certification body for products
Branches in regions operating in the area:
(click to contact the regional office or use the contact form in the page header)
Prague branch
České Budějovice
Předměřice nad Labem
Brno
Ostrava branch
ČSN 64 5421 | Testing of cellular materials. Determination of water absorption of cellular plastics |
ČSN 72 7012-1 | Determination of steady state thermal conductivity of materials. Hot plate methods. General principles |
ČSN 72 7012-2 | Determination of Steady State Thermal Conductivity of Materials. Hot Plate Methods. Guarded Hot Plate Method |
ČSN 72 7012-3 | Determination of Steady State Thermal Conductivity of Materials. Hot Plate Methods. Heat Flow Meter Method |
ČSN 72 7014 | Determination of Steady State Thermal Conductivity of Materials. Evaluating of Tests |
ČSN 72 7302 | Thermal insulation materials from inorganic fibres. Methods of testing |
ČSN 72 7306 | Determination of thermal conductivity of building materials and products |
ČSN 73 2578 | Test for water-tightness of surface finish of building structures |
ČSN 73 2579 | Test for frost resistance of surface finish of building structures |
ČSN EN 12085 | Thermal insulating products for building applications - Determination of linear dimensions of test specimens |
ČSN EN 12086 | Thermal insulating products for building applications - Determination of water vapour transmission properties |
ČSN EN 12087 | Thermal insulating products for building applications - Determination of long term water absorption by immersion |
ČSN EN 12087+A1 | Thermal insulating products for building applications - Determination of long term water absorption by immersion |
ČSN EN 12088 | Thermal insulating products for building applications - Determination of long term water absorption by diffusion |
ČSN EN 12089 | Thermal insulating products for building applications - Determination of bending behaviour |
ČSN EN 12090 | Thermal insulating products for building applications - Determination of shear behaviour |
ČSN EN 12430 | Thermal insulating products for building applications - Determination of behaviour under point load |
ČSN EN 13829 | Thermal performance of building - Determination of air permeability of buildings - Fan pressurization method (ISO 9972:1996, modified) |
ČSN EN 15632-4 , art. 6.2 | District heating pipes - Pre-insulated flexible pipe systems - Part 4: Bonded system with metal service pipes; requirements and test methods |
ČSN EN 1602 | Thermal insulating products for building applications - Determination of the apparent density |
ČSN EN 1603 | Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 °C/ 50 % relative humidity) |
ČSN EN 1603 | Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 °C/ 50 % relative humidity) |
ČSN EN 1604 | Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions |
ČSN EN 1605 | Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions |
ČSN EN 1606 | Thermal insulating products for building applications - Determination of compressive creep |
ČSN EN 1607 | Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces |
ČSN EN 1608 | Thermal insulating products for building applications - Determination of tensile strength parallel to faces |
ČSN EN 1609 | Thermal insulating products for building applications - Determination of short term water absorption by partial immersion |
ČSN EN 1946-2 | Thermal performance of building products and components - Specific criteria for the assessment of laboratory measuring heat transfer properties - Part 2: Measurements by guarded hot plate method |
ČSN EN 253, art. 5.2.2 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene |
ČSN EN 822 | Thermal insulating products for building applications - Determination of length and width |
ČSN EN 823 | Thermal insulating products for building applications - Determination of thickness |
ČSN EN 824 | Thermal insulating products for building applications - Determination of squareness |
ČSN EN 825 | Thermal insulating products for building applications - Determination of flatness |
ČSN EN 826 | Thermal insulating products for building applications - Determination of compression behaviour |
ČSN EN ISO 12570 | Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature |
ČSN EN 12430 | Thermal insulating products for building applications - Determination of behaviour under point load |
ČSN EN 12431 | Thermal insulating products for building applications - Determination of thickness for floating floor insulating products |
ČSN EN 12664 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance |
ČSN EN 12667 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance |
ČSN EN 12939 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance |
ČSN EN 13162, art. 5.3 | Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification |
ČSN EN 13163, art. 5.3 | Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) productsc - Specification |
ČSN EN 13164, art. 5.3 | Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification |
ČSN EN 13165, art. 5.3 | Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification |
ČSN EN 13166, art. 5.3 | Thermal insulation products for buildings - Factory made phenolic foam (PF) products - Specification |
ČSN EN 13167, art. 5.3 | Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification |
ČSN EN 13168, art. 5.3 | Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification |
ČSN EN 13169, art. 5.3 | Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specification |
ČSN EN 13170, art. 5.3 | Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification |
ČSN EN 13171, art. 5.3 | Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification |
ČSN EN 13467 | Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation |
ČSN EN 13470 | Thermal insulation products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation |
ČSN EN 13496 | Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes |
ČSN EN 13950 | Gypsum plasterboard thermal/acoustic insulation composite panels - Definitions, requirements and test methods |
ČSN EN 13950 | Gypsum plasterboard thermal/acoustic insulation composite panels - Definitions, requirements and test methods |
ČSN EN 13950 | Gypsum plasterboard thermal/acoustic insulation composite panels - Definitions, requirements and test methods |
ČSN EN 14303, art. 5.3 | Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification |
ČSN EN 1934 | Thermal performance of building - Determination of thermal resistance by hot box method using heat flow meter - Masonry |
ČSN EN ISO 1923 | Cellular plastics and rubbers - Determination of linear dimensions |
ČSN EN ISO 845 | Cellular plastics and rubbers - Determination of apparent density |
ČSN EN ISO 8990 | Thermal insulation - Determination of steady state thermal transmission properties - Calibrated and guarded hot box |
ČSN EN ISO 8990 | Thermal insulation - Determination of steady state thermal transmission properties - Calibrated and guarded hot box |
ETAG 004 | External Thermal Insulation Composite Systems (ETICS)" with rendering intended for use as external thermal insulation to the walls of buildings |
ETAG 004, č. 5.1.4.1 | ETICS - Bond strength |
ETAG 004, art. 5.1.3.1 | ETICS - Water absorption (capillarity test) |
ETAG 004, art. 5.1.3.2.1 | ETICS - Hygrothermal behaviour |
ETAG 004, art. 5.1.3.2.1 | ETICS - Hygrothermal behaviour |
ETAG 004, art. 5.1.3.2.2 | ETICS - Freeze-thaw behaviour |
ETAG 004, art. 5.1.3.2.2 | ETICS - |
ETAG 004, art. 5.1.3.3.1 | ETICS - Resistance to hard body impact |
ETAG 004, art. 5.1.3.3.2 | ETICS - Resistance to perforation (Perfotest) |
ETAG 004, art. 5.1.3.4 | ETICS - Water vapour permeability (resistance to wa ter vapour diffusion) |
ETAG 004, art. 5.1.4.1 | ETICS - Bond strength |
ETAG 004, art. 5.1.4.1.1 | ETICS - Bond strength between base coat and insulation product |
ETAG 004, art. 5.1.4.1.2 | ETICS - Bond strength test between adhesive and substrate |
ETAG 004, art. 5.1.4.1.3 | ETICS -Bond strength test between adhesive (mortar or paste) and insulation product |
ETAG 004, art. 5.1.4.3.1 | ETICS -Pull-through tests of fixings |
ETAG 004, art. 5.1.4.3.2 | ETICS -Static foam block test |
ETAG 004, art. 5.1.7.1 | ETICS -Bond strength after ageing |
ETAG 004, art. 5.1.7.1.2 | ETICS -Bond strength after ageing -Finishing coat not tested on the rig |
ETAG 004, art. 5.2.4.1.2 | ETICS -Tensile test perpendicular to the faces-In wet conditions |
ETAG 004, art. 5.5.4.1 | ETICS - Render Strip Tensile Test |
ETAG 004, art. 5.6.7.1 | ETICS -Glass fibre mesh - Tensile strength and elongation* of the reinforcing fabric |
ETAG 004, art. C.1.1.1 | ETICS - The identification of the ETICS components -Density |
ETAG 004, art. C.1.1.2 | ETICS - The identification of the ETICS components - Dry extract |
ETAG 004, art. C.1.1.3 | ETICS - The identification of the ETICS components - Ash content |
ETAG 004, art. C.1.2.1 | ETICS - The identification of the ETICS components - Water retention capability |
ETAG 004, art. C.1.2.2 | ETICS - The identification of the ETICS components -Density of fresh mortar |
ETAG 004, art. C.1.3.1.2 | ETICS - The identification of the ETICS components -Shrinkage test |
ETAG 004, art. C.1.3.2 | ETICS - The identification of the ETICS components -Products with a thickness up to 5 mm: static modulus of elasticity, tensile strength and elongation at break |
ETAG 004, art. C.3.1 | ETICS - The identification of the ETICS components -Reinforcement -Mass per unit area |
ETAG 004, art. C.3.2 | ETICS - The identification of the ETICS components -Reinforcements -Ash content |
ETAG 004, art. C.3.3 | ETICS - The identification of the ETICS components -Reinforcement - Mesh size and number of filaments |
ETAG 004, art. C.3.4 | ETICS -The identification of the ETICS components -Reinforcement- Elongation |
ETAG 004, art. C.6.1 | ETICS - The identification of the ETICS components -Reinforcement -Mass per unit area |
ETAG 004, annex C.1.1 | ETICS - The identification of the ETICS components - Density |
ETAG 004, annex C.1.2 | ETICS - The identification of the ETICS components - Dry extract |
ETAG 004, annex C.1.3 | ETICS - The identification of the ETICS components - Ash content |
ETAG 004, annex C.3.2 | ETICS - The identification of the ETICS components - Density of fresh mortar |
ISO 7892 | ETICS - Impact resistance tests |
ISO 8302 | Determination of steady-state thermal resistance and related properties |
ÖNORM B 6122, art. 4.4 | ETICS - reinforcement mesh - determination of thickness and density |