The accredited laboratories of the Technical and Test Institute for Construction Prague, SOE (TZÚS Prague), offer tests in the field of metal parts, metal structures, anchoring and connecting elements, a list of accredited test procedures can be found in the table below, in this area, TZÚS Prague also offers non-accredited test procedures. If you are interested in services in this area, please contact the branch according to your chosen region, or use the inquiry form at the bottom of the page. Laboratory services are complemented by the offer of the certification body for production.
Regional branches operating in the field:
(click to contact your regional branch or use the contact form at the bottom of the page)
The Prague Branch
The České Budějovice Branch
The Brno Branch
The Ostrava Branch
The Technical Engineering Services Branch
TR 026, final draft 12.12.2006 | Tests of plastic anchors and dowels |
TR 025, final draft 6.12.2006 | Tests of plastic anchors and dowels |
ETAG 029, čl. 2.4 | Tests of metallic anchors |
ETAG 020, annex A | Tests of plastic anchors and dowels |
ETAG 014, tab. 5.1 | Tests of plastic anchors and dowels |
ETAG 006, chapter 5.3.4.1, 5.3.4.3, 5.3.7.1, 5.3.7.2 | Tests of plastic anchors and dowels |
ETAG 001, annex A | Tests of metallic anchors |
ČSN ISO 7801 | Metallic materials. Wire. Reverse bend test |
ČSN ISO 2178 | Non-magnetic coatings on magnetic substrates. Measurement of coating thickness. Magnetic method |
ČSN EN ISO 9015-1 | Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints |
ČSN EN ISO 7438 | Metallic materials - Bend test |
ČSN EN ISO 6892-1 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature |
ČSN EN ISO 6507-1 | Metallic materials - Vickers hardness test - Part 1: Test method |
ČSN EN ISO 5173 | Destructive tests on welds in metallic materials - Bend tests |
ČSN EN ISO 2808 | Paints and varnishes - Determination of film thickness |
ČSN EN ISO 2360 | Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method |
ČSN EN ISO 17660-2 | Welding - Welding of reinforcing steel - Part 2: Non load-bearing welded joints |
ČSN EN ISO 17660-1 | Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints |
ČSN EN ISO 15630-3 | Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel |
ČSN EN ISO 15630-2 | Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric |
ČSN EN ISO 15630-1 | Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, wire rod and wire |
ČSN EN ISO 1463 | Metallic and oxide coatings - Measurement of coating thickness - Microscopical method |
ČSN EN 846-9 | Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels |
ČSN EN 845-3+A1 | Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork |
ČSN EN 845-2, chapter 5.4 | Specification for ancillary components for masonry - Part 2: Lintels |
ČSN EN 845-1+A1, chapter 5.3 | Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets |
ČSN EN 508-3, annex B | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel |
ČSN EN 508-2, annex A | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium |
ČSN EN 508-1, annex D | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel |
ČSN EN 506, annex A | Roofing products from metal sheet - Specification for self-supporting products of copper or zinc sheet |
ČSN EN 40-3-2, chapter 7 | Lighting columns - Part 3-2: Design and verification - Verification by testing |
ČSN EN 1993-1-3, annex A | Eurocode 3: Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting |
ČSN EN 1917 | Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced |
ČSN EN 14782 | Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements |
ČSN EN 13964 | Suspended ceilings - Requirements and test methods |
ČSN EN 1337-5 | Structural bearings - Part 5: Pot bearings |
ČSN EN 1337-3 | Structural bearings - Part 3: Elastomeric bearings |
ČSN EN 12797 | Brazing - Destructive tests of brazed joints |
ČSN EN 12767 | Passive safety of support structures for road equipment - Requirements and test methods |
ČSN EN 1253-2 | Gullies for buildings - Part 2: Test methods |
ČSN EN 124 | Gully tops and manhole tops for vehicular and pedestrian areas. Design requirements, type, testing, marking, qality control |
ČSN EN 10080 | Steel for the reinforcement of concrete - Weldable reinforcing steel - General |
ČSN EN 10002-1 | Metallic materials. Tensile testing. Part 1: Method of test (at ambient temperature) |
ČSN 74 6930 | Steel floor grids. Common regulations |
ČSN 42 0363 | Fatigue test |
ČSN 42 0355 | Relaxation test of prestressing steels at normal temperatures |
ČSN 42 0008 | Form and position deviations of metallurgic products |