The accredited laboratories of the Technical and Test Institute for Construction Prague, SOE (TZÚS Prague), offer testing in the field of mortars, screeds, adhesives; the list of accredited test procedures can be found in the table below. The Technical and Test Institute for Construction Prague, SOE also offers non-accredited test procedures in this field. If you are interested in services in this area, please contact the branch in your selected region or use the inquiry form at the bottom of the page. Laboratory services are complemented with the services provided by the certification body for products.
Regional branches operating in the field:
(click to contact your regional branch or use the contact form at the bottom of the page)
The Prague Branch
The České Budějovice Branch
The Předměřice nad Labem Branch
The Brno Branch
The Ostrava Branch
ČSN 72 2452 | Testing of frost resistance of mortar |
ČSN 72 7030 | Determination of water vapour coefficient diffusion of building material. General part |
ČSN 73 2577 | Test for surface finish adhesion of building structures to the base |
ČSN 73 2578 | Test for water-tightness of surface finish of building structures |
ČSN 73 2579 | Test for frost resistance of surface finish of building structures |
ČSN 73 2580 | Testing of water vapour permeability through surface finish of building structures |
ČSN 73 2582 | Test for abrasive resistance of surface finish of building structures |
ČSN 73 6175 | Measurement and evaluation of pavement surface roughness |
ČSN 73 6242 | Design and construction of pavements on road bridges |
ČSN EN 1015-1 | Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis) |
ČSN EN 1015-10 | Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar |
ČSN EN 1015-11 | Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strentgth of hardened mortar |
ČSN EN 1015-12 | Methods of test for mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates |
ČSN EN 1015-17 | Methods of test for mortar for masonry - Part 17: Determination of water-soluble chloride content of fresh mortars |
ČSN EN 1015-18 | Methods of test for mortar for masonry - Part 18: Determination of water absorption coefficient due to capillarity action of hardened mortar |
ČSN EN 1015-19 | Methods of test for mortar for masonry - Part 19: Determination of water vapour permeability of hardened rendering and plastering mortars |
ČSN EN 1015-21 | Methods of test for mortar for masonry - Part 21: Determination of the compatibility of one-coat rendering mortars with substrates |
ČSN EN 1015-3 | Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table) |
ČSN EN 1015-4 | Methods of test for mortar for masonry - Part 4: Determination of consistence of fresh mortar (by plunger penetration) |
ČSN EN 1015-6 | Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar |
ČSN EN 1015-7 | Methods of test for mortar for masonry - Part 7: Determination of air content of fresh mortar |
ČSN EN 1015-9 | Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar |
ČSN EN 1052-3 | Methods of test for masonry - Part 3: Determination of initial shear strength |
ČSN EN 12002 | Adhesives for tiles - Determination of transverse deformation for cementitious adhesives and grouts |
ČSN EN 12003 | Adhesives for tiles - Determination of shear adhesion strength of reaction resin adhesives |
ČSN EN 12190 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar |
ČSN EN 12617-1 | Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS) |
ČSN EN 12617-4 | Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion |
ČSN EN 12808-1 | Adhesives and grouts for tiles - Part 1: Determination of chemical resistance of reaction resin mortars |
ČSN EN 12808-2 | Grouts for tiles - Part 2: Determination of resistance to abrasion |
ČSN EN 12808-3 | Grouts for tiles - Part 3: Determination of flexural and compressive strength |
ČSN EN 12808-4 | Grouts for tiles - Part 4: Determination of shrinkage |
ČSN EN 12808-5 | Grouts for tiles - Part 5: Determination of water absorption |
ČSN EN 13036-1 | Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique |
ČSN EN 13036-4 | Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test |
ČSN EN 13057 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption |
ČSN EN 1308 | Adhesives for tiles - Determination of slip |
ČSN EN 1324 | Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesives |
ČSN EN 13279-2 | Gypsum binders and gypsum plasters - Part 2: Test methods |
ČSN EN 13294 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time |
ČSN EN 13295 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance to carbonation |
ČSN EN 13412 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression |
ČSN EN 13454-2 | Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2: Test methods |
ČSN EN 1346 | Adhesives for tiles - Determination of open time |
ČSN EN 1347 | Adhesives for tiles - Determination of wetting capability |
ČSN EN 1348 | Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives |
ČSN EN 13687-1 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion |
ČSN EN 13687-3 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact |
ČSN EN 1372 | Adhesives - Test method for adhesives for floor and wall coverings - Peel test |
ČSN EN 1373 | Adhesives - Test method for adhesives for floor and wall coverings - Shear test |
ČSN EN 13872 | Method of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of dimensional change |
ČSN EN 13892-2 | Methods of test for screed materials - Part 2: Determination of flexural and compressive strength |
ČSN EN 13892-3 | Methods of test for screed materials - Part 3: Determination of wear resistance - Böhme |
ČSN EN 13892-4 | Methods of test for screed materials - Part 4: Determination of wear resistance - BCA |
ČSN EN 13892-6 | Methods of test for screed materials - Part 6: Determination of surface hardness |
ČSN EN 13892-8 | Methods of test for screed materials - Part 8: Determination of bond strength |
ČSN EN 13963 | ČSN EN 13963 |
ČSN EN 14630 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of carbonation depth in hardened concrete by the phenolphthalein method |
ČSN EN 1465 | Adhesives - Determination of tensile lap-shear strength of bonded assemblies |
ČSN EN 14891 | Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, evaluation of conformity, classification and designation |
ČSN EN 1542 | Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off |
ČSN EN 1770 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of the coefficient of thermal expansion |
ČSN EN 1841 | Adhesives - Test methods for adhesives for floor coverings and wall coverings - Determination of dimensional changes of a linoleum floor covering in contact with an adhesive |
ČSN EN 1881 | Products and systems for the protection and repair of concrete structures - Test methods - Testing of anchoring products by the pull-out method |
ČSN EN 1903 | Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing |
ČSN EN 445 | Grout for prestressing tendons - Test methods |
ČSN EN ISO 15148 | Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion |
ČSN EN ISO 5470-1 | Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader |
DIN 52615 | Testing of thermal insulating materials; determination of water vapour (moisture) permeability of construction and insulating materials |
DIN-V 18550 | Plastering/rendering and plastering/rendering systems - Execution |
IP 0600T008 (ČSN 72 2453) | Testing of volume stability of mortar |
IP 0600T009 (ČSN 72 2454) | Testing of permeability for water vapours of mortar |
WTA 2-9-04/D | Renovation mortar systems WTA |