The accredited laboratories of the Technical and Test Institute for Construction Prague, SOE (TZÚS Prague), offer tests in the field of binders, slag and fly ash, a list of accredited test procedures can be found in the table below, in this area TZÚS Prague also offers non-accredited test procedures. If you are interested in services in this area, please contact the branch according to your chosen region, or use the inquiry form at the bottom of the page. Laboratory services are complemented by the offer of the certification body for products.
Regional branches operating in the field:
(click to contact your regional branch or use the contact form at the bottom of the page)
The Prague Branch
The České Budějovice Branch
The Brno Branch
The Ostrava Branch
The Teplice Branch
ČSN 72 0102 | Basic analysis of silicates - Determination of loss by drying |
ČSN 72 0105-1 | Basic analysis of silicates - Determination of silicon dioxide |
ČSN 72 0105-2 | Basic analysis of silicates - Determination of silicon dioxide |
ČSN 72 0106 | Basic analysis of silicates - Determination of silicon dioxide and the acid - indecomposable part |
ČSN 72 0107 | Basic analysis of silicates - Determination of acid - indecomposable part |
ČSN 72 0110-3 | Basic analysis of silicates - Determination of ferric oxide |
ČSN 72 0110-4 | Basic analysis of silicates - Determination of ferric oxide |
ČSN 72 0113-1 | Basic analysis of silicates - Determination of calcium oxide |
ČSN 72 0113-2 | Basic analysis of silicates - Determination of calcium oxide |
ČSN 72 0113-3 | Basic analysis of silicates - Determination of calcium oxide |
ČSN 72 0114-1 | Basic analysis of silicates - Determination of magnesium oxide |
ČSN 72 0114-2 | Basic analysis of silicates - Determination of magnesium oxide |
ČSN 72 0114-3 | Basic analysis of silicates - Determination of magnesium oxide |
ČSN 72 0117 | Basic analysis of silicates - Determination of sulphate sulphur |
ČSN 72 0118 | Basic analysis of silicates - Determination of total sulphur |
ČSN 72 1206 | Gypsum and anhydride cement admixture |
ČSN 72 1213 | Physical and mechanical tests of limestone |
ČSN 72 2071 | Fly ash for building industry purposes - Common provisions, requirements and test methods |
ČSN 72 2080 | Fly ash and ash from fluidised bed combustion for building industry purposes - Common provisions, requirements and test methods |
ČSN 72 2113 | Determination of density of cement |
ČSN 72 2301 | Plaster binders. Classification. Common technical requirements. Testing methods |
ČSN EN 1008 | Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
ČSN EN 13279-2 | Gypsum binders and gypsum plasters - Part 2: Test methods |
ČSN EN 13963 | Jointing materials for gypsum plasterboards - Definitions, requirements and test methods |
ČSN EN 14227-3 | Hydraulically bound mixtures - Specifications - Part 3: Fly ash bound granular mixtures |
ČSN EN 15167-1 | Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria |
ČSN EN 196-1 | Methods of testing cement - Part 1: Determination of strength |
ČSN EN 196-10 | Methods of testing cement - Part 10: Determination of the water-soluble chromium (VI) content of cement |
ČSN EN 196-2 | Method of testing cement - Part 2: Chemical analysis of cement |
ČSN EN 196-3 | Methods of testing cement - Part 3: Determination of setting times and soundness |
ČSN EN 196-5 | Methods of testing cement - Part 5: Pozzolanicity test for pozzolanic cement |
ČSN EN 196-6 | Methods of testing cement - Part 6: Determination of fineness |
ČSN EN 196-8 | Methods of testing cement - Part 8: Heat of hydration - Solution method |
ČSN EN 413-2 | Masonry cement - Part 2: Test methods |
ČSN EN 450-1 | Fly ash for concrete - Part 1: Definition, specifications and conformity criteria |
ČSN EN 451-1 | Method of testing fly ash - Part 1: Determination of free calcium oxide content |
ČSN EN 451-2 | Method of testing fly ash. Part 2: Determination of fineness by wet sieving |
ČSN EN 459-2 | Building lime - Part 2: Test methods |